top of page

CourtTech System Walls

CourtTech System Walls are freestanding and can be installed in the middle of a spacious hall, without any connection to load bearing walls. 

It has a total thickness of 94mm, consisting of two 21 mm thick RS special high density boards, attached to steel profiles. The self-supporting wall elements are fixed on steel columns to the floor at two positions. The surface of the finished wall has 3 coats of paint. The System Wall is filled with 2.5 tons of kiln dried sand. The System Wall is hard, flat and free of vertical joints. The out-of-play lines are aluminium profiles and powder-coated in the colour of your choice.

A combination of both CourtTech Wall Systems can be applied in one court.

Our boards have been specifically developed for squash and we have had them tested at the University of Applied Science Rosenheim.

CT Wall Graphic.png

Powder coated aluminium out-of-play profile

21mm RS high density fibre board

Steel profiles

Kiln dried aggregate

CourtTech Squash courts
bottom of page